submitted by sidhujag to ethereum [link] [comments]
We are excited to participate and present Syscoin Platform's ideal characteristics and capabilities towards a well-rounded Reddit Community Points solution!
Our scaling solution for Reddit Community Points involves 2-way peg interoperability with Ethereum. This will provide a scalable token layer built specifically for speed and high volumes of simple value transfers at a very low cost, while providing sovereign ownership and onchain finality.
Token transfers scale by taking advantage of a globally sorting mempool that provides for probabilistically secure assumptions of “as good as settled”. The opportunity here for token receivers is to have an app-layer interactivity on the speed/security tradeoff (99.9999% assurance within 10 seconds). We call this Z-DAG, and it achieves high-throughput across a mesh network topology presently composed of about 2,000 geographically dispersed full-nodes. Similar to Bitcoin, however, these nodes are incentivized to run full-nodes for the benefit of network security, through a bonded validator scheme. These nodes do not participate in the consensus of transactions or block validation any differently than other nodes and therefore do not degrade the security model of Bitcoin’s validate first then trust, across every node. Each token transfer settles on-chain. The protocol follows Bitcoin core policies so it has adequate code coverage and protocol hardening to be qualified as production quality software. It shares a significant portion of Bitcoin’s own hashpower through merged-mining.
This platform as a whole can serve token microtransactions, larger settlements, and store-of-value in an ideal fashion, providing probabilistic scalability whilst remaining decentralized according to Bitcoin design. It is accessible to ERC-20 via a permissionless and trust-minimized bridge that works in both directions. The bridge and token platform are currently available on the Syscoin mainnet. This has been gaining recent attention for use by loyalty point programs and stablecoins such as Binance USD.
SolutionsSyscoin Foundation identified a few paths for Reddit to leverage this infrastructure, each with trade-offs. The first provides the most cost-savings and scaling benefits at some sacrifice of token autonomy. The second offers more preservation of autonomy with a more narrow scope of cost savings than the first option, but savings even so. The third introduces more complexity than the previous two yet provides the most overall benefits. We consider the third as most viable as it enables Reddit to benefit even while retaining existing smart contract functionality. We will focus on the third option, and include the first two for good measure.
Syscoin + Matic IntegrationMatic and Blockchain Foundry Inc, the public company formed by the founders of Syscoin, recently entered a partnership for joint research and business development initiatives. This is ideal for all parties as Matic Network and Syscoin Platform provide complementary utility. Syscoin offers characteristics for sovereign ownership and security based on Bitcoin’s time-tested model, and shares a significant portion of Bitcoin’s own hashpower. Syscoin’s focus is on secure and scalable simple value transfers, trust-minimized interoperability, and opt-in regulatory compliance for tokenized assets rather than scalability for smart contract execution. On the other hand, Matic Network can provide scalable EVM for smart contract execution. Reddit Community Points can benefit from both.
Syscoin + Matic integration is actively being explored by both teams, as it is helpful to Reddit, Ethereum, and the industry as a whole.
Proving Performance & Cost SavingsOur POC focuses on 100,000 on-chain settlements of token transfers on the Syscoin Core blockchain. Transfers and burns perform equally with Syscoin. For POCs related to smart contracts (subscriptions, etc), refer to the Matic Network proposal.
On-chain settlement of 100k transactions was accomplished within roughly twelve minutes, well-exceeding Reddit’s expectation of five days. This was performed using six full-nodes operating on compute-optimized AWS c4.2xlarge instances which were geographically distributed (Virginia, London, Sao Paulo Brazil, Oregon, Singapore, Germany). A higher quantity of settlements could be reached within the same time-frame with more broadcasting nodes involved, or using hosts with more resources for faster execution of the process.
Addresses used: 100,014
The demonstration was executed using this tool. The results can be seen in the following blocks:
It is important to note that this POC is not focused on Z-DAG. The performance of Z-DAG has been benchmarked within realistic network conditions: Whiteblock’s audit is publicly available. Network latency tests showed an average TPS around 15k with burst capacity up to 61k. Zero-latency control group exhibited ~150k TPS. Mainnet testing of the Z-DAG network is achievable and will require further coordination and additional resources.
Even further optimizations are expected in the upcoming Syscoin Core release which will implement a UTXO model for our token layer bringing further efficiency as well as open the door to additional scaling technology currently under research by our team and academic partners. At present our token layer is account-based, similar to Ethereum. Opt-in compliance structures will also be introduced soon which will offer some positive performance characteristics as well. It makes the most sense to implement these optimizations before performing another benchmark for Z-DAG, especially on the mainnet considering the resources required to stress-test this network.
Cost SavingsTotal cost for these 100k transactions: $0.63 USD
See the live fee comparison for savings estimation between transactions on Ethereum and Syscoin. Below is a snapshot at time of writing:
ETH price: $318.55 ETH gas price: 55.00 Gwei ($0.37)
Syscoin price: $0.11
Snapshot of live fee comparison chart
Z-DAG provides a more efficient fee-market. A typical Z-DAG transaction costs 0.0000582 SYS. Tokens can be safely redeemed/re-spent within seconds or allowed to settle on-chain beforehand. The costs should remain about this low for microtransactions.
Syscoin will achieve further reduction of fees and even greater scalability with offchain payment channels for assets, with Z-DAG as a resilience fallback. New payment channel technology is one of the topics under research by the Syscoin development team with our academic partners at TU Delft. In line with the calculation in the Lightning Networks white paper, payment channels using assets with Syscoin Core will bring theoretical capacity for each person on Earth (7.8 billion) to have five on-chain transactions per year, per person, without requiring anyone to enter a fee market (aka “wait for a block”). This exceeds the minimum LN expectation of two transactions per person, per year; one to exist on-chain and one to settle aggregated value.
Tools, Infrastructure & Documentation
Syscoin BridgeMainnet Demonstration of Syscoin Bridge with the Basic Attention Token ERC-20
A two-way blockchain interoperability system that uses Simple Payment Verification to enable:
APITools to simplify using Syscoin Bridge as a service with dapps and wallets will be released some time after implementation of Syscoin Core 4.2. These will be based upon the same processes which are automated in the current live Sysethereum Dapp that is functioning with the Syscoin mainnet.
DocumentationSyscoin Bridge & How it Works (description and process flow)
Superblock Validation Battles
HOWTO: Provision the Bridge for your ERC-20
HOWTO: Setup an Agent
Developer & User Diligence
Trade-offThe Syscoin Ethereum Bridge is secured by Agent nodes participating in a decentralized and incentivized model that involves roles of Superblock challengers and submitters. This model is open to participation. The benefits here are trust-minimization, permissionless-ness, and potentially less legal/regulatory red-tape than interop mechanisms that involve liquidity providers and/or trading mechanisms.
The trade-off is that due to the decentralized nature there are cross-chain settlement times of one hour to cross from Ethereum to Syscoin, and three hours to cross from Syscoin to Ethereum. We are exploring ways to reduce this time while maintaining decentralization via zkp. Even so, an “instant bridge” experience could be provided by means of a third-party liquidity mechanism. That option exists but is not required for bridge functionality today. Typically bridges are used with batch value, not with high frequencies of smaller values, and generally it is advantageous to keep some value on both chains for maximum availability of utility. Even so, the cross-chain settlement time is good to mention here.
CostEthereum -> Syscoin: Matic or Ethereum transaction fee for bridge contract interaction, negligible Syscoin transaction fee for minting tokens
Syscoin -> Ethereum: Negligible Syscoin transaction fee for burning tokens, 0.01% transaction fee paid to Bridge Agent in the form of the ERC-20, Matic or Ethereum transaction fee for contract interaction.
Z-DAGZero-Confirmation Directed Acyclic Graph is an instant settlement protocol that is used as a complementary system to proof-of-work (PoW) in the confirmation of Syscoin service transactions. In essence, a Z-DAG is simply a directed acyclic graph (DAG) where validating nodes verify the sequential ordering of transactions that are received in their memory pools. Z-DAG is used by the validating nodes across the network to ensure that there is absolute consensus on the ordering of transactions and no balances are overflowed (no double-spends).
APISyscoin-js provides tooling for all Syscoin Core RPCs including interactivity with Z-DAG.
DocumentationZ-DAG White Paper
Useful read: An in-depth Z-DAG discussion between Syscoin Core developer Jag Sidhu and Brave Software Research Engineer Gonçalo Pestana
Trade-offZ-DAG enables the ideal speed/security tradeoff to be determined per use-case in the application layer. It minimizes the sacrifice required to accept and redeem fast transfers/payments while providing more-than-ample security for microtransactions. This is supported on the premise that a Reddit user receiving points does need security yet generally doesn’t want nor need to wait for the same level of security as a nation-state settling an international trade debt. In any case, each Z-DAG transaction settles onchain at a block target of 60 seconds.
Syscoin SpecsSyscoin 3.0 White Paper
(4.0 white paper is pending. For improved scalability and less blockchain bloat, some features of v3 no longer exist in current v4: Specifically Marketplace Offers, Aliases, Escrow, Certificates, Pruning, Encrypted Messaging)
WalletsWeb3 and mobile wallets are under active development by Blockchain Foundry Inc as WebAssembly applications and expected for release not long after mainnet deployment of Syscoin Core 4.2. Both of these will be multi-coin wallets that support Syscoin, SPTs, Ethereum, and ERC-20 tokens. The Web3 wallet will provide functionality similar to Metamask.
Syscoin Platform and tokens are already integrated with Blockbook. Custom hardware wallet support currently exists via ElectrumSys. First-class HW wallet integration through apps such as Ledger Live will exist after 4.2.
Current supported wallets
Syscoin Spark Desktop
ExplorersMainnet: https://sys1.bcfn.ca (Blockbook)
Thank you for close consideration of our proposal. We look forward to feedback, and to working with the Reddit community to implement an ideal solution using Syscoin Platform!
25. https://news.bitcoin.com/eth-volumes-top-125-billion-in-q3-high-risk-dapps-dominate-tron-network/Here is a small cross post for price movement: https://dailyhodl.com/2020/09/30/bitcoin-btc-tezos-xtz-cardano-ada-etoro-crypto-roundup/
\This post has been written by Hedgehog, an MCS influencer and one of Korea's famous cryptocurrency key opinion leaders.*submitted by MyCoinStory to MyCoinStory [link] [comments]
Greetings from MCS, the derivatives trading platform where traders ALWAYS come first.
As a cryptocurrency perpetual contract trader, you may have seen the index price and the mark price at least once while trading. It seems that many traders are confused about the differences between the index price and the mark price, so I will explain these two prices and the dual price mechanism used in perpetual contracts.
🎯 What is the Dual Price Mechanism?The dual price mechanism consists of the mark price and the last traded price. This mechanism protects traders from damages caused by market manipulation, lack of liquidity, or differences in spot prices and futures prices. It also provides a fair trading environment for all traders on MCS, and is used to minimize the price gap between spot prices and the perpetual contract prices.
In order to fully understand the concept of mark price, you first need to know the concept of index price.
🎯 Index PriceYou can think of the index price as a spot price. The MCS cryptocurrency derivatives exchange refers to a total of 7 exchanges to calculate the BTC/USDT index price, and the exchanges are Binance, Bitfinex, Huobi Global, OKEX, Bittrex Global, HitBTC, and Poloniex. So basically, the index price of the MCS BTC/USDT perpetual contract is the average price of the same cryptocurrency pair's prices on the aforementioned 7 global exchanges.
🎯 Mark PriceThe mark price is the price reflecting the status at-the-moment of the MCS exchange to the index price. The mark price is also known as the fair price in some exchanges. The formula for calculating the mark price is "Index Price * (1 + Funding Basis)", and the formula for calculating the funding basis is "Current Funding Ratio * Time Remaining Until Funding Settlement / Funding Interval". Since the calculated mark price represents a more accurate perpetual contract price, the MCS cryptocurrency derivatives exchange uses this mark price as a measure to trigger the liquidation.
🎯 Last Traded PriceThe last traded price is the market price of a pair (like BTC/USDT) on the MCS exchange. In short, it refers to the most recent price of the actual trade on MCS.
If you have understood the concepts of each of the above terms, this question will pop up in your head: "so, why do we need a dual pricing mechanism?" Let me answer that question with an example.
🎯 Why Use The Dual Price Mechanism[Example]
The mark price and the last traded price are at similar levels of 10,000 USDT and 10,001 USDT, respectively. At this time, Bob wants to enter a short position with 100x leverage using his entire Bitcoin inventory on MCS. At that moment, the last traded price suddenly drops to 5,000 USDT causing the rapid fluctuation in price. Nevertheless, the mark price remains at 10,000 USDT.
In this situation, if the last traded price was used as a measure of liquidation, most of the long-positions with leverage would have been liquidated. Therefore, in order to prevent unfair liquidation like the case above, MCS applies the dual price mechanism.
I am a Bitcoin margin trader, Hedgehog. Thank you for reading this post.
🔸 MCS Official Website : https://mycoinstory.com
🔸 MCS Telegram : https://t.me/mycoinstory_en
Traders ALWAYS come first on MCS.
MCS Official Twitter (EN): https://twitter.com/mycoinstory_mcs
MCS Official Facebook: https://www.facebook.com/MyCoinStory.official
Author: Gamals Ahmed, CoinEx Business Ambassadorsubmitted by CoinEx_Institution to kybernetwork [link] [comments]
ABSTRACTIn this research report, we present a study on Kyber Network. Kyber Network is a decentralized, on-chain liquidity protocol designed to make trading tokens simple, efficient, robust and secure.
Kyber design allows any party to contribute to an aggregated pool of liquidity within each blockchain while providing a single endpoint for takers to execute trades using the best rates available. We envision a connected liquidity network that facilitates seamless, decentralized cross-chain token swaps across Kyber based networks on different chains.
Kyber is a fully on-chain liquidity protocol that enables decentralized exchange of cryptocurrencies in any application. Liquidity providers (Reserves) are integrated into one single endpoint for takers and users. When a user requests a trade, the protocol will scan the entire network to find the reserve with the best price and take liquidity from that particular reserve.
1.INTRODUCTIONDeFi applications all need access to good liquidity sources, which is a critical component to provide good services. Currently, decentralized liquidity is comprised of various sources including DEXes (Uniswap, OasisDEX, Bancor), decentralized funds and other financial apps. The more scattered the sources, the harder it becomes for anyone to either find the best rate for their trade or to even find enough liquidity for their need.
Kyber is a blockchain-based liquidity protocol that aggregates liquidity from a wide range of reserves, powering instant and secure token exchange in any decentralized application.
The protocol allows for a wide range of implementation possibilities for liquidity providers, allowing a wide range of entities to contribute liquidity, including end users, decentralized exchanges and other decentralized protocols. On the taker side, end users, cryptocurrency wallets, and smart contracts are able to perform instant and trustless token trades at the best rates available amongst the sources.
The Kyber Network is project based on the Ethereum protocol that seeks to completely decentralize the exchange of crypto currencies and make exchange trustless by keeping everything on the blockchain.
Through the Kyber Network, users should be able to instantly convert or exchange any crypto currency.
1.1 OVERVIEW ABOUT KYBER NETWORK PROTOCOLThe Kyber Network is a decentralized way to exchange ETH and different ERC20 tokens instantly — no waiting and no registration needed.
Using this protocol, developers can build innovative payment flows and applications, including instant token swap services, ERC20 payments, and financial DApps — helping to build a world where any token is usable anywhere.
Kyber’s fully on-chain design allows for full transparency and verifiability in the matching engine, as well as seamless composability with DApps, not all of which are possible with off-chain or hybrid approaches. The integration of a large variety of liquidity providers also makes Kyber uniquely capable of supporting sophisticated schemes and catering to the needs of DeFi DApps and financial institutions. Hence, many developers leverage Kyber’s liquidity pool to build innovative financial applications, and not surprisingly, Kyber is the most used DeFi protocol in the world.
The Kyber Network is quite an established project that is trying to change the way we think of decentralised crypto currency exchange.
The Kyber Network has seen very rapid development. After being announced in May 2017 the testnet for the Kyber Network went live in August 2017. An ICO followed in September 2017, with the company raising 200,000 ETH valued at $60 million in just one day.
The live main net was released in February 2018 to whitelisted participants, and on March 19, 2018, the Kyber Network opened the main net as a public beta. Since then the network has seen increasing growth, with network volumes growing more than 500% in the first half of 2019.
Although there was a modest decrease in August 2019 that can be attributed to the price of ETH dropping by 50%, impacting the overall total volumes being traded and processed globally.
They are developing a decentralised exchange protocol that will allow developers to build payment flows and financial apps. This is indeed quite a competitive market as a number of other such protocols have been launched.
In Brief - Kyber Network is a tool that allows anyone to swap tokens instantly without having to use exchanges. - It allows vendors to accept different types of cryptocurrency while still being paid in their preferred crypto of choice. - It’s built primarily for Ethereum, but any smart-contract based blockchain can incorporate it.
At its core, Kyber is a decentralized way to exchange ETH and different ERC20 tokens instantly–no waiting and no registration needed. To do this Kyber uses a diverse set of liquidity pools, or pools of different crypto assets called “reserves” that any project can tap into or integrate with.
A typical use case would be if a vendor allowed customers to pay in whatever currency they wish, but receive the payment in their preferred token. Another example would be for Dapp users. At present, if you are not a token holder of a certain Dapp you can’t use it. With Kyber, you could use your existing tokens, instantly swap them for the Dapp specific token and away you go.
All this swapping happens directly on the Ethereum blockchain, meaning every transaction is completely transparent.
1.1.1 WHY BUILD THE KYBER NETWORK?While crypto currencies were built to be decentralized, many of the exchanges for trading crypto currencies have become centralized affairs. This has led to security vulnerabilities, with many exchanges becoming the victims of hacking and theft.
It has also led to increased fees and costs, and the centralized exchanges often come with slow transfer times as well. In some cases, wallets have been locked and users are unable to withdraw their coins.
Decentralized exchanges have popped up recently to address the flaws in the centralized exchanges, but they have their own flaws, most notably a lack of liquidity, and often times high costs to modify trades in their on-chain order books.
Some of the Integrations with Kyber Protocol
The Kyber Network was formed to provide users with a decentralized exchange that keeps everything right on the blockchain, and uses a reserve system rather than an order book to provide high liquidity at all times. This will allow for the exchange and transfer of any cryptocurrency, even cross exchanges, and costs will be kept at a minimum as well.
The Kyber Network has three guiding design philosophies since the start:
1.1.2 WHO INVENTED KYBER?Kyber’s founders are Loi Luu, Victor Tran, Yaron Velner — CEO, CTO, and advisor to the Kyber Network.
1.1.3 WHAT DISTINGUISHES KYBER?Kyber’s mission has always been to integrate with other protocols so they’ve focused on being developer-friendly by providing architecture to allow anyone to incorporate the technology onto any smart-contract powered blockchain. As a result, a variety of different dapps, vendors, and wallets use Kyber’s infrastructure including Set Protocol, bZx, InstaDApp, and Coinbase wallet.
Besides, dapps, vendors, and wallets, Kyber also integrates with other exchanges such as Uniswap — sharing liquidity pools between the two protocols.
A typical use case would be if a vendor allowed customers to pay in whatever currency they wish, but receive the payment in their preferred token. Another example would be for Dapp users. At present, if you are not a token holder of a certain Dapp you can’t use it. With Kyber, you could use your existing tokens, instantly swap them for the Dapp specific token and away you go.
Limit orders on Kyber allow users to set a specific price in which they would like to exchange a token instead of accepting whatever price currently exists at the time of trading. However, unlike with other exchanges, users never lose custody of their crypto assets during limit orders on Kyber.
The Kyber protocol works by using pools of crypto funds called “reserves”, which currently support over 70 different ERC20 tokens. Reserves are essentially smart contracts with a pool of funds. Different parties with different prices and levels of funding control all reserves. Instead of using order books to match buyers and sellers to return the best price, the Kyber protocol looks at all the reserves and returns the best price among the different reserves. Reserves make money on the “spread” or differences between the buying and selling prices. The Kyber wants any token holder to easily convert one token to another with a minimum of fuss.
1.2 KYBER PROTOCOLThe protocol smart contracts offer a single interface for the best available token exchange rates to be taken from an aggregated liquidity pool across diverse sources. ● Aggregated liquidity pool. The protocol aggregates various liquidity sources into one liquidity pool, making it easy for takers to find the best rates offered with one function call. ● Diverse sources of liquidity. The protocol allows different types of liquidity sources to be plugged into. Liquidity providers may employ different strategies and different implementations to contribute liquidity to the protocol. ● Permissionless. The protocol is designed to be permissionless where any developer can set up various types of reserves, and any end user can contribute liquidity. Implementations need to take into consideration various security vectors, such as reserve spamming, but can be mitigated through a staking mechanism. We can expect implementations to be permissioned initially until the maintainers are confident about these considerations.
The core feature that the Kyber protocol facilitates is the token swap between taker and liquidity sources. The protocol aims to provide the following properties for token trades: ● Instant Settlement. Takers do not have to wait for their orders to be fulfilled, since trade matching and settlement occurs in a single blockchain transaction. This enables trades to be part of a series of actions happening in a single smart contract function. ● Atomicity. When takers make a trade request, their trade either gets fully executed, or is reverted. This “all or nothing” aspect means that takers are not exposed to the risk of partial trade execution. ● Public rate verification. Anyone can verify the rates that are being offered by reserves and have their trades instantly settled just by querying from the smart contracts. ● Ease of integration. Trustless and atomic token trades can be directly and easily integrated into other smart contracts, thereby enabling multiple trades to be performed in a smart contract function.
How each actor works is specified in Section Network Actors. 1. Takers refer to anyone who can directly call the smart contract functions to trade tokens, such as end-users, DApps, and wallets. 2. Reserves refer to anyone who wishes to provide liquidity. They have to implement the smart contract functions defined in the reserve interface in order to be registered and have their token pairs listed. 3. Registered reserves refer to those that will be cycled through for matching taker requests. 4. Maintainers refer to anyone who has permission to access the functions for the adding/removing of reserves and token pairs, such as a DAO or the team behind the protocol implementation. 5. In all, they comprise of the network, which refers to all the actors involved in any given implementation of the protocol.
The protocol implementation needs to have the following: 1. Functions for takers to check rates and execute the trades 2. Functions for the maintainers to registeremove reserves and token pairs 3. Reserve interface that defines the functions reserves needs to implement
1.3 KYBER CORE SMART CONTRACTSKyber Core smart contracts is an implementation of the protocol that has major protocol functions to allow actors to join and interact with the network. For example, the Kyber Core smart contracts provide functions for the listing and delisting of reserves and trading pairs by having clear interfaces for the reserves to comply to be able to register to the network and adding support for new trading pairs. In addition, the Kyber Core smart contracts also provide a function for takers to query the best rate among all the registered reserves, and perform the trades with the corresponding rate and reserve. A trading pair consists of a quote token and any other token that the reserve wishes to support. The quote token is the token that is either traded from or to for all trades. For example, the Ethereum implementation of the Kyber protocol uses Ether as the quote token.
In order to search for the best rate, all reserves supporting the requested token pair will be iterated through. Hence, the Kyber Core smart contracts need to have this search algorithm implemented.
The key functions implemented in the Kyber Core Smart Contracts are listed in Figure 2 below. We will visit and explain the implementation details and security considerations of each function in the Specification Section.
1.4 HOW KYBER’S ON-CHAIN PROTOCOL WORKS?Kyber is the liquidity infrastructure for decentralized finance. Kyber aggregates liquidity from diverse sources into a pool, which provides the best rates for takers such as DApps, Wallets, DEXs, and End users.
1.4.1 PROVIDING LIQUIDITY AS A RESERVEAnyone can operate a Kyber Reserve to market make for profit and make their tokens available for DApps in the ecosystem. Through an open reserve architecture, individuals, token teams and professional market makers can contribute token assets to Kyber’s liquidity pool and earn from the spread in every trade. These tokens become available at the best rates across DApps that tap into the network, making them instantly more liquid and useful.
MAIN RESERVE TYPES Kyber currently has over 45 reserves in its network providing liquidity. There are 3 main types of reserves that allow different liquidity contribution options to suit the unique needs of different providers. 1. Automated Price Reserves (APR) — Allows token teams and users with large token holdings to have an automated yet customized pricing system with low maintenance costs. Synthetix and Melon are examples of teams that run APRs. 2. Fed Price Reserves (FPR) — Operated by professional market makers that require custom and advanced pricing strategies tailored to their specific needs. Kyber alongside reserves such as OneBit, runs FPRs. 3. Bridge Reserves (BR) — These are specialized reserves meant to bring liquidity from other on-chain liquidity providers like Uniswap, Oasis, DutchX, and Bancor into the network.
1.5 KYBER NETWORK ROLESThere Kyber Network functions through coordination between several different roles and functions as explained below: - Users — This entity uses the Kyber Network to send and receive tokens. A user can be an individual, a merchant, and even a smart contract account. - Reserve Entities — This role is used to add liquidity to the platform through the dynamic reserve pool. Some reserve entities are internal to the Kyber Network, but others may be registered third parties. Reserve entities may be public if the public contributes to the reserves they hold, otherwise they are considered private. By allowing third parties as reserve entities the network adds diversity, which prevents monopolization and keeps exchange rates competitive. Allowing third party reserve entities also allows for the listing of less popular coins with lower volumes. - Reserve Contributors — Where reserve entities are classified as public, the reserve contributor is the entity providing reserve funds. Their incentive for doing so is a profit share from the reserve. - The Reserve Manager — Maintains the reserve, calculates exchange rates and enters them into the network. The reserve manager profits from exchange spreads set by them on their reserves. They can also benefit from increasing volume by accessing the entire Kyber Network. - The Kyber Network Operator — Currently the Kyber Network team is filling the role of the network operator, which has a function to adds/remove Reserve Entities as well as controlling the listing of tokens. Eventually, this role will revert to a proper decentralized governance.
1.6 BASIC TOKEN TRADEA basic token trade is one that has the quote token as either the source or destination token of the trade request. The execution flow of a basic token trade is depicted in the diagram below, where a taker would like to exchange BAT tokens for ETH as an example. The trade happens in a single blockchain transaction. 1. Taker sends 1 ETH to the protocol contract, and would like to receive BAT in return. 2. Protocol contract queries the first reserve for its ETH to BAT exchange rate. 3. Reserve 1 offers an exchange rate of 1 ETH for 800 BAT. 4. Protocol contract queries the second reserve for its ETH to BAT exchange rate. 5. Reserve 2 offers an exchange rate of 1 ETH for 820 BAT. 6. This process goes on for the other reserves. After the iteration, reserve 2 is discovered to have offered the best ETH to BAT exchange rate. 7. Protocol contract sends 1 ETH to reserve 2. 8. The reserve sends 820 BAT to the taker.
1.7 TOKEN-TO-TOKEN TRADEA token-to-token trade is one where the quote token is neither the source nor the destination token of the trade request. The exchange flow of a token to token trade is depicted in the diagram below, where a taker would like to exchange BAT tokens for DAI as an example. The trade happens in a single blockchain transaction. 1. Taker sends 50 BAT to the protocol contract, and would like to receive DAI in return. 2. Protocol contract sends 50 BAT to the reserve offering the best BAT to ETH rate. 3. Protocol contract receives 1 ETH in return. 4. Protocol contract sends 1 ETH to the reserve offering the best ETH to DAI rate. 5. Protocol contract receives 30 DAI in return. 6. Protocol contract sends 30 DAI to the user.
2.KYBER NETWORK CRYSTAL (KNC) TOKENKyber Network Crystal (KNC) is an ERC-20 utility token and an integral part of Kyber Network.
KNC is the first deflationary staking token where staking rewards and token burns are generated from actual network usage and growth in DeFi.
The Kyber Network Crystal (KNC) is the backbone of the Kyber Network. It works to connect liquidity providers and those who need liquidity and serves three distinct purposes. The first of these is to collect transaction fees, and a portion of every fee collected is burned, which keeps KNC deflationary. Kyber Network Crystals (KNC), are named after the crystals in Star Wars used to power light sabers.
The KNC also ensures the smooth operation of the reserve system in the Kyber liquidity since entities must use third-party tokens to buy the KNC that pays for their operations in the network.
KNC allows token holders to play a critical role in determining the incentive system, building a wide base of stakeholders, and facilitating economic flow in the network. A small fee is charged each time a token exchange happens on the network, and KNC holders get to vote on this fee model and distribution, as well as other important decisions. Over time, as more trades are executed, additional fees will be generated for staking rewards and reserve rebates, while more KNC will be burned. - Participation rewards — KNC holders can stake KNC in the KyberDAO and vote on key parameters. Voters will earn staking rewards (in ETH) - Burning — Some of the network fees will be burned to reduce KNC supply permanently, providing long-term value accrual from decreasing supply. - Reserve incentives — KNC holders determine the portion of network fees that are used as rebates for selected liquidity providers (reserves) based on their volume performance.
Finally, the KNC token is the connection between the Kyber Network and the exchanges, wallets, and dApps that leverage the liquidity network. This is a virtuous system since entities are rewarded with referral fees for directing more users to the Kyber Network, which helps increase adoption for Kyber and for the entities using the Network.
And of course there will soon be a fourth and fifth uses for the KNC, which will be as a staking token used to generate passive income, as well as a governance token used to vote on key parameters of the network.
The Kyber Network Crystal (KNC) was released in a September 2017 ICO at a price around $1. There were 226,000,000 KNC minted for the ICO, with 61% sold to the public. The remaining 39% are controlled 50/50 by the company and the founders/advisors, with a 1 year lockup period and 2 year vesting period.
Currently, just over 180 million coins are in circulation, and the total supply has been reduced to 210.94 million after the company burned 1 millionth KNC token in May 2019 and then its second millionth KNC token just three months later.
That means that while it took 15 months to burn the first million KNC, it took just 10 weeks to burn the second million KNC. That shows how rapidly adoption has been growing recently for Kyber, with July 2019 USD trading volumes on the Kyber Network nearly reaching $60 million. This volume has continued growing, and on march 13, 2020 the network experienced its highest daily trading activity of $33.7 million in a 24-hour period.
Currently KNC is required by Reserve Managers to operate on the network, which ensures a minimum amount of demand for the token. Combined with future plans for burning coins, price is expected to maintain an upward bias, although it has suffered along with the broader market in 2018 and more recently during the summer of 2019.
It was unfortunate in 2020 that a beginning rally was cut short by the coronavirus pandemic, although the token has stabilized as of April 2020, and there are hopes the rally could resume in the summer of 2020.
2.1 HOW ARE KNC TOKENS PRODUCED?The native token of Kyber is called Kyber Network Crystals (KNC). All reserves are required to pay fees in KNC for the right to manage reserves. The KNC collected as fees are either burned and taken out of the total supply or awarded to integrated dapps as an incentive to help them grow.
2.2 HOW DO YOU GET HOLD OF KNC TOKENS?Kyber Swap can be used to buy ETH directly using a credit card, which can then be used to swap for KNC. Besides Kyber itself, exchanges such as Binance, Huobi, and OKex trade KNC.
2.3 WHAT CAN YOU DO WITH KYBER?The most direct and basic function of Kyber is for instantly swapping tokens without registering an account, which anyone can do using an Etheruem wallet such as MetaMask. Users can also create their own reserves and contribute funds to a reserve, but that process is still fairly technical one–something Kyber is working on making easier for users in the future.
2.4 THE GOAL OF KYBER THE FUTUREThe goal of Kyber in the coming years is to solidify its position as a one-stop solution for powering liquidity and token swapping on Ethereum. Kyber plans on a major protocol upgrade called Katalyst, which will create new incentives and growth opportunities for all stakeholders in their ecosystem, especially KNC holders. The upgrade will mean more use cases for KNC including to use KNC to vote on governance decisions through a decentralized organization (DAO) called the KyberDAO.
With our upcoming Katalyst protocol upgrade and new KNC model, Kyber will provide even more benefits for stakeholders. For instance, reserves will no longer need to hold a KNC balance for fees, removing a major friction point, and there will be rebates for top performing reserves. KNC holders can also stake their KNC to participate in governance and receive rewards.
2.5 BUYING & STORING KNCThose interested in buying KNC tokens can do so at a number of exchanges. Perhaps your best bet between the complete list is the likes of Coinbase Pro and Binance. The former is based in the USA whereas the latter is an offshore exchange.
The trading volume is well spread out at these exchanges, which means that the liquidity is not concentrated and dependent on any one exchange. You also have decent liquidity on each of the exchange books. For example, the Binance BTC / KNC books are wide and there is decent turnover. This means easier order execution.
KNC is an ERC20 token and can be stored in any wallet with ERC20 support, such as MyEtherWallet or MetaMask. One interesting alternative is the KyberSwap Android mobile app that was released in August 2019.
It allows for instant swapping of tokens and has support for over 70 different altcoins. It also allows users to set price alerts and limit orders and works as a full-featured Ethereum wallet.
2.6 KYBER KATALYST UPGRADEKyber has announced their intention to become the de facto liquidity layer for the Decentralized Finance space, aiming to have Kyber as the single on-chain endpoint used by the majority of liquidity providers and dApp developers. In order to achieve this goal the Kyber Network team is looking to create an open ecosystem that garners trust from the decentralized finance space. They believe this is the path that will lead the majority of projects, developers, and users to choose Kyber for liquidity needs. With that in mind they have recently announced the launch of a protocol upgrade to Kyber which is being called Katalyst.
The Katalyst upgrade will create a stronger ecosystem by creating strong alignments towards a common goal, while also strengthening the incentives for stakeholders to participate in the ecosystem.
The primary beneficiaries of the Katalyst upgrade will be the three major Kyber stakeholders: 1. Reserve managers who provide network liquidity; 2. dApps that connect takers to Kyber; 3. KNC holders.
These stakeholders can expect to see benefits as highlighted below: Reserve Managers will see two new benefits to providing liquidity for the network. The first of these benefits will be incentives for providing reserves. Once Katalyst is implemented part of the fees collected will go to the reserve managers as an incentive for providing liquidity.
This mechanism is similar to rebates in traditional finance, and is expected to drive the creation of additional reserves and market making, which in turn will lead to greater liquidity and platform reach.
Katalyst will also do away with the need for reserve managers to maintain a KNC balance for use as network fees. Instead fees will be automatically collected and used as incentives or burned as appropriate. This should remove a great deal of friction for reserves to connect with Kyber without affecting the competitive exchange rates that takers in the system enjoy. dApp Integrators will now be able to set their own spread, which will give them full control over their own business model. This means the current fee sharing program that shares 30% of the 0.25% fee with dApp developers will go away and developers will determine their own spread. It’s believed this will increase dApp development within Kyber as developers will now be in control of fees.
KNC Holders, often thought of as the core of the Kyber Network, will be able to take advantage of a new staking mechanism that will allow them to receive a portion of network fees by staking their KNC and participating in the KyberDAO.
2.7 COMING KYBERDAOWith the implementation of the Katalyst protocol the KNC holders will be put right at the heart of Kyber. Holders of KNC tokens will now have a critical role to play in determining the future economic flow of the network, including its incentive systems.
The primary way this will be achieved is through KyberDAO, a way in which on-chain and off-chain governance will align to streamline cooperation between the Kyber team, KNC holders, and market participants.
The Kyber Network team has identified 3 key areas of consideration for the KyberDAO: 1. Broad representation, transparent governance and network stability 2. Strong incentives for KNC holders to maintain their stake and be highly involved in governance 3. Maximizing participation with a wide range of options for voting delegation
Interaction between KNC Holders & Kyber
This means KNC holders have been empowered to determine the network fee and how to allocate the fees to ensure maximum network growth. KNC holders will now have three fee allocation options to vote on: - Voting Rewards: Immediate value creation. Holders who stake and participate in the KyberDAO get their share of the fees designated for rewards. - Burning: Long term value accrual. The decreasing supply of KNC will improve the token appreciation over time and benefit those who did not participate. - Reserve Incentives:Value creation via network growth. By rewarding Kyber reserve managers based on their performance, it helps to drive greater volume, value, and network fees.
2.8 TRANSPARENCY AND STABILITYThe design of the KyberDAO is meant to allow for the greatest network stability, as well as maximum transparency and the ability to quickly recover in emergency situations. Initally the Kyber team will remain as maintainers of the KyberDAO. The system is being developed to be as verifiable as possible, while still maintaining maximum transparency regarding the role of the maintainer in the DAO.
Part of this transparency means that all data and processes are stored on-chain if feasible. Voting regarding network fees and allocations will be done on-chain and will be immutable. In situations where on-chain storage or execution is not feasible there will be a set of off-chain governance processes developed to ensure all decisions are followed through on.
2.9 KNC STAKING AND DELEGATIONStaking will be a new addition and both staking and voting will be done in fixed periods of times called “epochs”. These epochs will be measured in Ethereum block times, and each KyberDAO epoch will last roughly 2 weeks.
This is a relatively rapid epoch and it is beneficial in that it gives more rapid DAO conclusion and decision-making, while also conferring faster reward distribution. On the downside it means there needs to be a new voting campaign every two weeks, which requires more frequent participation from KNC stakeholders, as well as more work from the Kyber team.
Delegation will be part of the protocol, allowing stakers to delegate their voting rights to third-party pools or other entities. The pools receiving the delegation rights will be free to determine their own fee structure and voting decisions. Because the pools will share in rewards, and because their voting decisions will be clearly visible on-chain, it is expected that they will continue to work to the benefit of the network.
3. TRADINGAfter the September 2017 ICO, KNC settled into a trading price that hovered around $1.00 (decreasing in BTC value) until December. The token has followed the trend of most other altcoins — rising in price through December and sharply declining toward the beginning of January 2018.
The KNC price fell throughout all of 2018 with one exception during April. From April 6th to April 28th, the price rose over 200 percent. This run-up coincided with a blog post outlining plans to bring Bitcoin to the Ethereum blockchain. Since then, however, the price has steadily fallen, currently resting on what looks like a $0.15 (~0.000045 BTC) floor.
With the number of partners using the Kyber Network, the price may rise as they begin to fully use the network. The development team has consistently hit the milestones they’ve set out to achieve, so make note of any release announcements on the horizon.
4. COMPETITIONThe 0x project is the biggest competitor to Kyber Network. Both teams are attempting to enter the decentralized exchange market. The primary difference between the two is that Kyber performs the entire exchange process on-chain while 0x keeps the order book and matching off-chain.
As a crypto swap exchange, the platform also competes with ShapeShift and Changelly.
5.KYBER MILESTONES• June 2020: Digifox, an all-in-one finance application by popular crypto trader and Youtuber Nicholas Merten a.k.a DataDash (340K subs), integrated Kyber to enable users to easily swap between cryptocurrencies without having to leave the application. • June 2020: Stake Capital partnered with Kyber to provide convenient KNC staking and delegation services, and also took a KNC position to participate in governance. • June 2020: Outlined the benefits of the Fed Price Reserve (FPR) for professional market makers and advanced developers. • May 2020: Kyber crossed US$1 Billion in total trading volume and 1 Million transactions, performed entirely on-chain on Ethereum. • May 2020: StakeWith.Us partnered Kyber Network as a KyberDAO Pool Master. • May 2020: 2Key, a popular blockchain referral solution using smart links, integrated Kyber’s on-chain liquidity protocol for seamless token swaps • May 2020: Blockchain game League of Kingdoms integrated Kyber to accept Token Payments for Land NFTs. • May 2020: Joined the Zcash Developer Alliance , an invite-only working group to advance Zcash development and interoperability. • May 2020: Joined the Chicago DeFi Alliance to help accelerate on-chain market making for professionals and developers. • March 2020: Set a new record of USD $33.7M in 24H fully on-chain trading volume, and $190M in 30 day on-chain trading volume. • March 2020: Integrated by Rarible, Bullionix, and Unstoppable Domains, with the KyberWidget deployed on IPFS, which allows anyone to swap tokens through Kyber without being blocked. • February 2020: Popular Ethereum blockchain game Axie Infinity integrated Kyber to accept ERC20 payments for NFT game items. • February 2020: Kyber’s protocol was integrated by Gelato Finance, Idle Finance, rTrees, Sablier, and 0x API for their liquidity needs. • January 2020: Kyber Network was found to be the most used protocol in the whole decentralized finance (DeFi) space in 2019, according to a DeFi research report by Binance. • December 2019: Switcheo integrated Kyber’s protocol for enhanced liquidity on their own DEX. • December 2019: DeFi Wallet Eidoo integrated Kyber for seamless in-wallet token swaps. • December 2019: Announced the development of the Katalyst Protocol Upgrade and new KNC token model. • July 2019: Developed the Waterloo Bridge , a Decentralized Practical Cross-chain Bridge between EOS and Ethereum, successfully demonstrating a token swap between Ethereum to EOS. • July 2019: Trust Wallet, the official Binance wallet, integrated Kyber as part of its decentralized token exchange service, allowing even more seamless in-wallet token swaps for thousands of users around the world. • May 2019: HTC, the large consumer electronics company with more than 20 years of innovation, integrated Kyber into its Zion Vault Wallet on EXODUS 1 , the first native web 3.0 blockchain phone, allowing users to easily swap between cryptocurrencies in a decentralized manner without leaving the wallet. • January 2019: Introduced the Automated Price Reserve (APR) , a capital efficient way for token teams and individuals to market make with low slippage. • January 2019: The popular Enjin Wallet, a default blockchain DApp on the Samsung S10 and S20 mobile phones, integrated Kyber to enable in-wallet token swaps. • October 2018: Kyber was a founding member of the WBTC (Wrapped Bitcoin) Initiative and DAO. • October 2018: Developed the KyberWidget for ERC20 token swaps on any website, with CoinGecko being the first major project to use it on their popular site.
“A peer-to-peer, append-only datastore that uses consensus to synchronise cryptographically-secure data”.
In the context of hardware and software systems, formal verification is the act of proving or disproving the correctness of intended algorithms underlying a system with respect to a certain formal specification or property, using formal methods of mathematics.
Formal verification can be helpful in proving the correctness of systems such as: cryptographic protocols, combinational circuits, digital circuits with internal memory, and software expressed as source code.
There are two basic building blocks in DeFi/OpFi though: 1) stablecoins as you need a non-volatile currency to get access to this market and 2) a dex to be able to trade all these financial assets. The rest are build on top of these blocks.
So far, together with our partners and community, we have worked on developing these building blocks with XSGD as a stablecoin. We are working on bringing a USD-backed stablecoin as well. We will soon have a decentralised exchange developed by Switcheo. And with HGX going live, we are also venturing into the tokenization space. More to come in the future.”*
A whirlwind tour of Defi, paying close attention to protocols that we’re leveraging at Genesis Block.submitted by mickhagen to genesisblockhq [link] [comments]
This is the third post of Crypto-Powered — a new series that examines what it means for Genesis Block to be a digital bank that’s powered by crypto, blockchain, and decentralized protocols.
Last week we explored how building on legacy finance is a fool’s errand. The future of money belongs to those who build with crypto and blockchain at their core. We also started down the crypto rabbit hole, introducing Bitcoin, Ethereum, and DeFi (decentralized finance). That post is required reading if you hope to glean any value from the rest of this series.
97% of all activity on Ethereum in the last quarter has been DeFi-related. The total value sitting inside DeFi protocols is roughly $2B — double what it was a month ago. The explosive growth cannot be ignored. All signs suggest that Ethereum & DeFi are a Match Made in Heaven, and both on their way to finding strong product/market fit.
So in this post, we’re doing a whirlwind tour of DeFi. We look at specific examples and use-cases already in the wild and seeing strong growth. And we pay close attention to protocols that Genesis Block is integrating with. Alright, let’s dive in.
StablecoinsStablecoins are exactly what they sound like: cryptocurrencies that are stable. They are not meant to be volatile (like Bitcoin). These assets attempt to peg their price to some external reference (eg. USD or Gold). A non-volatile crypto asset can be incredibly useful for things like merchant payments, cross-border transfers, or storing wealth — becoming your own bank but without the stress of constant price volatility.
There are major governments and central banks that are experimenting with or soon launching their own stablecoins like China with their digital yuan and the US Federal Reserve with their digital dollar. There are also major corporations working in this area like JP Morgan with their JPM Coin, and of course Facebook with their Libra Project.
Stablecoin activity has grown 800% in the last year, with $290B of transaction volume (funds moving on-chain).The most popular USD-pegged stablecoins include:
tablecoins are playing an increasingly important role in the world of DeFi. In a way, they serve as common pipes & bridges between the various protocols.https://preview.redd.it/v9ki2qro12b51.png?width=700&format=png&auto=webp&s=dbf591b122fc4b3d83b381389145b88e2505b51d
Lending & BorrowingThree of the top five DeFi protocols relate to lending & borrowing. These popular lending protocols look very similar to traditional money markets. Users who want to earn interest/yield can deposit (lend) their funds into a pool of liquidity. Because it behaves similarly to traditional money markets, their funds are not locked, they can withdraw at any time. It’s highly liquid.
Borrowers can tap into this pool of liquidity and take out loans. Interest rates depend on the utilization rate of the pool — how much of the deposits in the pool have already been borrowed. Supply & demand. Thus, interest rates are variable and borrowers can pay their loans back at any time.
So, who decides how much a borrower can take? What’s the process like? Are there credit checks? How is credit-worthiness determined?These protocols are decentralized, borderless, permissionless. The people participating in these markets are from all over the world. There is no simple way to verify identity or check credit history. So none of that happens.
Credit-worthiness is determined simply by how much crypto collateral the borrower puts into the protocol. For example, if a user wants to borrow $5k of USDC, then they’ll need to deposit $10k of BTC or ETH. The exact amount of collateral depends on the rules of the protocol — usually the more liquid the collateral asset, the more borrowing power the user can receive.
The most prominent lending protocols include Compound, Aave, Maker, and Atomic Loans. Recently, Compound has seen meteoric growth with the introduction of their COMP token — a token used to incentivize and reward participants of the protocol. There’s almost $1B in outstanding debt in the Compound protocol. Mainframe is also working on an exciting protocol in this area and the latest iteration of their white paper should be coming out soon.
There is very little economic risk to these protocols because all loans are overcollateralized.I repeat, all loans are overcollateralized. If the value of the collateral depreciates significantly due to price volatility, there are sophisticated liquidation systems to ensure the loan always gets paid back.
InvestmentsBuying, selling, and trading crypto assets is certainly one form of investing (though not for the faint of heart). But there are now DeFi protocols to facilitate making and managing traditional-style investments.
Through DeFi, you can invest in Gold. You can invest in stocks like Amazon and Apple. You can short Tesla. You can access the S&P 500. This is done through crypto-based synthetics — which gives users exposure to assets without needing to hold or own the underlying asset. This is all possible with protocols like UMA, Synthetix, or Market protocol.
Maybe your style of investing is more passive. With PoolTogether , you can participate in a no-loss lottery.
Maybe you’re an advanced trader and want to trade options or futures. You can do that with DeFi protocols like Convexity, Futureswap, and dYdX. Maybe you live on the wild side and trade on margin or leverage, you can do that with protocols like Fulcrum, Nuo, and DDEX. Or maybe you’re a degenerate gambler and want to bet against Trump in the upcoming election, you can do that on Augur.
And there are plenty of DeFi protocols to help with crypto investing. You could use Set Protocol if you need automated trading strategies. You could use Melonport if you’re an asset manager. You could use Balancer to automatically rebalance your portfolio.
With as little as $1, people all over the world can have access to the same investment opportunities and tools that used to be reserved for only the wealthy, or those lucky enough to be born in the right country.
You can start to imagine how services like Etrade, TD Ameritrade, Schwab, and even Robinhood could be massively disrupted by a crypto-native company that builds with these types of protocols at their foundation.https://preview.redd.it/agco8msx12b51.png?width=700&format=png&auto=webp&s=3bbb595f9ecc84758d276dbf82bc5ddd9e329ff8
InsuranceAs mentioned in our previous post, there are near-infinite applications one can build on Ethereum. As a result, sometimes the code doesn’t work as expected. Bugs get through, it breaks. We’re still early in our industry. The tools, frameworks, and best practices are all still being established. Things can go wrong.
Sometimes the application just gets in a weird or bad state where funds can’t be recovered — like with what happened with Parity where $280M got frozen (yes, I lost some money in that). Sometimes, there are hackers who discover a vulnerability in the code and maliciously steal funds — like how dForce lost $25M a few months ago, or how The DAO lost $50M a few years ago. And sometimes the system works as designed, but the economic model behind it is flawed, so a clever user takes advantage of the system— like what recently happened with Balancer where they lost $500k.
There are a lot of risks when interacting with smart contracts and decentralized applications — especially for ones that haven’t stood the test of time. This is why insurance is such an important development in DeFi.
Insurance will be an essential component in helping this technology reach the masses.Two protocols that are leading the way on DeFi insurance are Nexus Mutual and Opyn. Though they are both still just getting started, many people are already using them. And we’re excited to start working with them at Genesis Block.
Exchanges & LiquidityDecentralized Exchanges (DEX) were one of the first and most developed categories in DeFi. A DEX allows a user to easily exchange one crypto asset for another crypto asset — but without needing to sign up for an account, verify identity, etc. It’s all via decentralized protocols.
Within the first 5 months of 2020, the top 7 DEX already achieved the 2019 trading volume. That was $2.5B. DeFi is fueling a lot of this growth.
There are many different flavors of DEX. Some of the early ones included 0x, IDEX, and EtherDelta — all of which had a traditional order book model where buyers are matched with sellers.
Another flavor is the pooled liquidity approach where the price is determined algorithmically based on how much liquidity there is and how much the user wants to buy. This is known as an AMM (Automated Market Maker) — Uniswap and Bancor were early leaders here. Though lately, Balancer has seen incredible growth due mostly to their strong incentives for participation — similar to Compound.
There are some DEXs that are more specialized — for example, Curve and mStable focus mostly only stablecoins. Because of the proliferation of these decentralized exchanges, there are now aggregators that combine and connect the liquidity of many sources. Those include Kyber, Totle, 1Inch, and Dex.ag.
These decentralized exchanges are becoming more and more connected to DeFi because they provide an opportunity for yield and earning interest.Users can earn passive income by supplying liquidity to these markets. It usually comes in the form of sharing transaction fee revenue (Uniswap) or token rewards (Balancer).
PaymentsAs it relates to making payments, much of the world is still stuck on plastic cards. We’re grateful to partner with Visa and launch the Genesis Block debit card… but we still don’t believe that's the future of payments. We see that as an important bridge between the past (legacy finance) and the future (crypto).
Our first post in this series shared more on why legacy finance is broken. We talked about the countless unnecessary middle-men on every card swipe (merchant, acquiring bank, processor, card network, issuing bank). We talked about the slow settlement times.
The future of payments will be much better. Yes, it’ll be from a mobile phone and the user experience will be similar to ApplePay (NFC) or WePay (QR Code).
But more importantly, the underlying assets being moved/exchanged will all be crypto — digital, permissionless, and open source.Someone making a payment at the grocery store check-out line will be able to open up Genesis Block, use contactless tech or scan a QR code, and instantly pay for their goods. All using crypto. Likely a stablecoin. Settlement will be instant. All the middlemen getting their pound of flesh will be disintermediated. The merchant can make more and the user can spend less. Blockchain FTW!
Now let’s talk about a few projects working in this area. The xDai Burner Wallet experience was incredible at the ETHDenver event a few years ago, but that speed came at the expense of full decentralization (can it be censored or shut down?). Of course, Facebook’s Libra wants to become the new standard for global payments, but many are afraid to give Facebook that much control (newsflash: it isn’t very decentralized).
Bitcoin is decentralized… but it’s slow and volatile. There are strong projects like Lightning Network (Zap example) that are still trying to make it happen. Projects like Connext and OmiseGo are trying to help bring payments to Ethereum. The Flexa project is leveraging the gift card rails, which is a nice hack to leverage existing pipes. And if ETH 2.0 is as fast as they say it will be, then the future of payments could just be a stablecoin like DAI (a token on Ethereum).
In a way, being able to spend crypto on daily expenses is the holy grail of use-cases. It’s still early. It hasn’t yet been solved. But once we achieve this, then we can ultimately and finally say goodbye to the legacy banking & finance world. Employees can be paid in crypto. Employees can spend in crypto. It changes everything.
Legacy finance is hanging on by a thread, and it’s this use-case that they are still clinging to. Once solved, DeFi domination will be complete.https://preview.redd.it/svft1ce422b51.png?width=700&format=png&auto=webp&s=9a6afc9e9339a3fec29ee2ae743c07c3042ea4ce
Impact on Genesis BlockAt Genesis Block, we’re excited to leverage these protocols and take this incredible technology to the world. Many of these protocols are already deeply integrated with our product. In fact, many are essential. The masses won’t know (or care about) what Tether, USDC, or DAI is. They think in dollars, euros, pounds and pesos. So while the user sees their local currency in the app, the underlying technology is all leveraging stablecoins. It’s all on “crypto rails.”
When users deposit assets into their Genesis Block account, they expect to earn interest. They expect that money to grow. We leverage many of these low-risk lending/exchange DeFi protocols. We lend into decentralized money markets like Compound — where all loans are overcollateralized. Or we supply liquidity to AMM exchanges like Balancer. This allows us to earn interest and generate yield for our depositors. We’re the experts so our users don’t need to be.
We haven’t yet integrated with any of the insurance or investment protocols — but we certainly plan on it. Our infrastructure is built with blockchain technology at the heart and our system is extensible — we’re ready to add assets and protocols when we feel they are ready, safe, secure, and stable. Many of these protocols are still in the experimental phase. It’s still early.
At Genesis Block we’re excited to continue to be at the frontlines of this incredible, innovative, technological revolution called DeFi.---
None of these powerful DeFi protocols will be replacing Robinhood, SoFi, or Venmo anytime soon. They never will. They aren’t meant to! We’ve discussed this before, these are low-level protocols that need killer applications, like Genesis Block.
So now that we’ve gone a little deeper down the rabbit hole and we’ve done this whirlwind tour of DeFi, the natural next question is: why?
Why does any of it matter?Most of these financial services that DeFi offers already exist in the real world. So why does it need to be on a blockchain? Why does it need to be decentralized? What new value is unlocked? Next post, we answer these important questions.
To look at more projects in DeFi, check out DeFi Prime, DeFi Pulse, or Consensys.
Other Ways to Consume Today's Episode:
Download the app. We're a digital bank that's powered by crypto:https://genesisblock.com/download
Binance Options – Short duration American-style settlement. Unlimited liquidity. “Since launching Binance Futures in September 2019, we worked hard to provide a stable, fast, and low-fee futures platform for our users. Today, we are pleased to announce our first quarterly settlement futures contracts, which complements our existing range of ... Binance today introduces COIN- and USDT-margined product categories for its range of perpetual and quarterly futures to highlight the use of Bitcoin and altcoins as settlement currencies.. The new categorization puts cryptocurrencies on more equal footing with fiat, and reflects the increased interest in futures margined and settled with Bitcoin and altcoins. The settlement for Bitcoin Perpetual Futures is in USDT.Advertisement. $140 Spread B/W BitMex And Binance Quarterly Bitcoin Futures. The introduction of a weekly settled Bitcoin Futures contract will largely depend on the reception of this product. As it is, there is a $140 spread between Binance’s and BitMex’s end of September 2020 settled Bitcoin Futures contracts according to a Skew ... Binance cryptocurrency exchange - We operate the worlds biggest bitcoin exchange and altcoin crypto exchange in the world by volume Binance, the world’s biggest cryptocurrency exchange, is doubling down on derivatives by launching “COIN-margined” perpetual futures contracts that are denominated in bitcoin and have margins of up to 125x. A perpetual contract is a derivative that is similar to a traditional futures contract. But rather than settling once a week, month or quarter as a traditional futures contract would ... Binance Holding Limited, the company behind the largest cryptocurrency exchange by trading volumes, has launched its quarterly settled Bitcoin Futures contracts with a fixed expiration and settlement date. The exchange continues to add to its suite of cryptocurrency derivatives products less than a year after launching its Bitcoin perpetual trading platform. This announcement was made via a
[index]          
Join Binance Here: https://www.binance.com/en/futures/ref/41297141 👉-10% Discount Code For Binance Futures Referral is → 41297141 👉GET My Technical Analysi... การใช้งาน Binance Futures คราวๆ หากต้องการของมูลเพิ่มเติม ให้ดูที่ลิงค์ตาม ... This Vidoe explains how to Trade Binance Futures. How I’m Turning $100 Into $10,000 SAFELY – The Best Trading Strategy To Make $100 A Day - Duration: 30:46. Trading Fraternity 195,123 views Binance Futures Beginner’s Guide & Exchange Review: How to Trade Get upto Rs.50 Cashback when you pay using your Bank A/C on #Paytm 1. Install and login to Paytm App (if not already done) 2. Tap ... Binance Futures Trading. Binance 10% Bonus https://bit.ly/2WbkGYT Binance Sri Lanka https://t.me/BinanceSriLanka How to trade bitcoin futures on binance for beginners. Binance Bitcoin Futures Trading for Beginners EXPLAINED Join Binance https://www.binance.com/?ref=... 🟡Binance Futures 10% Off Fees Code: https://accounts.binance.com/en/register?source=futures&ref=sunnydecree 🟡Binance Signup 20% Off Fees for Altcoins: https:... Binance Futures: https://www.binance.com/en/futures/ref/blockbuilders BitMEX (save 10% trading fees): https://www.bitmex.com/register/KtaiLr In this how-to I... #bitcoin #crypto #cryptocurrencies In this quick video we will show how to place a trade in Binance Futures. ----- ...